Tool Cabinet with 541 Pieces – Kraft&Dele KD1071

Tool Cabinet with 541 Pieces — Kraft&Dele KD1071

The KD1071 is a fully equipped roller tool cabinet built for busy workshops, garages and anyone who would rather reach for the right tool than go looking for it. All 541 pieces arrive sorted into twelve drawers, so the cabinet is ready to work the day it lands.

The body is welded steel and the drawers run on ball-bearing slides, so they stay smooth and quiet even fully loaded. A safety interlock allows only one drawer to open at a time, which stops the cabinet tipping when a heavy drawer is pulled out. Rubber bumpers on the corners protect both the cabinet and whatever it gets pushed up against.

Four large castors with locking brakes let you move the cabinet across a workshop floor and hold it steady once it is in place. The hand tools are forged from chrome-vanadium (CrV) steel for durability under daily professional use.

Key Features

• 541 professional tools and accessories, sorted and ready to use
• Heavy-duty welded steel construction
• 12 drawers on ball-bearing slides — smooth, quiet operation under load
• Safety interlock: only one drawer opens at a time
• Chrome-vanadium (CrV) steel hand tools
• Rubber corner bumpers protect the cabinet and your workspace
• Large castors with automatic locking brakes
• Central locking system
• 12-month warranty

Full Drawer Contents

Centre Drawer — Socket and Bit Set (186 pieces)

• 3 × 72-tooth ratchet handles — 1/4″, 3/8″, 1/2″
• 1/2″ torque wrench, 20–210 Nm, 72 teeth
• 1/4″ hand driver for sockets and bits
• 9 × hex (Allen) L-keys — 1.5, 2, 2.5, 3, 4, 5, 6, 8, 10 mm
• 9 × Torx L-keys — T10, T15, T20, T25, T27, T30, T40, T45, T50
• 48 × 1/4″ drive bits — SL4, SL5.5, SL6.5, SL7; PH0–PH3; PZ0–PZ3; T8–T40; TT8–TT40; TTS10–TTS50; M8, M10, M12; H3–H8
• 13 × 1/4″ sockets — 4, 4.5, 5, 5.5, 6, 7, 8, 9, 10, 11, 12, 13, 14 mm
• 24 × 8 mm bits — SL8, SL10, SL12; PH3, PH4; PZ3, PZ4; T40–T70; H7–H14; TT40–TT70
• 3/8″ bit holder socket
• 17 × 3/8″ sockets — 6 to 22 mm
• 7 × 3/8″ Torx-E (star) sockets — E10, E11, E12, E14, E16, E18, E20
• 2 × 3/8″ spark plug sockets — 16 mm, 21 mm
• 18 × 1/2″ drive bit sockets — H14, H17, H19; M18×55L; R9, M9×100L; M16×100L; T80×100L; T40–T70×140L; R10×140L; M10, M12, M14×140L
• 17 × 1/2″ sockets — 10 to 32 mm
• 4 × long impact sockets for alloy wheels — 17, 19, 21, 22 mm
• 3 × universal joints — 1/4″, 3/8″, 1/2″
• 6 × extension bars — 1/4″×50 mm, 1/4″×100 mm, 3/8″×75 mm, 3/8″×150 mm, 1/2″×125 mm, 1/2″×250 mm
• 3 × sliding T-bar handles — 1/4″, 3/8″, 1/2″

Left Drawer 1 — Ring Spanners and Torx Keys (25 pieces)

• 12 × offset double ring spanners — 6×7, 8×9, 10×11, 12×13, 14×15, 16×17, 18×19, 20×22, 21×23, 22×24, 24×27, 30×32 mm
• 13 × Torx keys — T8, T10, T15, T20, T25, T27, T30, T40, T45, T50, T55, T60, T70

Left Drawer 2 — Pliers Set (12 pieces)

• 200 mm combination pliers
• 200 mm long-nose pliers, straight
• 190 mm side cutters
• 250 mm slip-joint water pump pliers
• 250 mm locking pliers (mole grips)
• 0–150 mm vernier caliper
• 4 × circlip pliers, 150 mm (internal/external, straight/bent)
• Telescopic magnetic pick-up tool
• 3 m tape measure

Left Drawer 3 — Hammers, Chisels and Punches (20 pieces)

• 300 g engineer’s hammer, wooden handle
• 40 mm panel-beating hammer
• 18-piece chisel and punch set with rubber hand guards

Left Drawer 4 — Open-End and Ratchet Spanners (31 pieces)

• 21 × open-end spanners — 6 to 32 mm
• 9 × ratcheting combination spanners — 8, 9, 10, 11, 12, 13, 14, 17, 19 mm
• 8″ adjustable spanner

Left Drawer 5 — T-Handle Hex and Torx Keys (18 pieces)

• 9 × ball-end hex T-handle keys — H2×100, H2.5×100, H3×100, H4×150, H5×150, H6×150, H7×150, H8×200, H10×200
• 9 × Torx T-handle keys — T10×100, T15×100, T20×100, T25×150, T27×150, T30×150, T40×150, T45×200, T50×200

Left Drawer 6 — Screwdriver Set (21 pieces)

• 7 × Phillips screwdrivers — PH2×38, PH0×75, PH1×75, PH2×100, PH2×125, PH3×150, PH3×175 mm
• 7 × slotted go-through (impact) screwdrivers — SL6×38, SL3×75, SL5×75, SL6×100, SL6×125, SL8×150, SL8×175 mm
• 7 × hex-bolster screwdrivers — SL6×38, PH2×38, SL5×100, PH1×100, SL6×100, SL6×150, PH3×150 mm

Right Drawer 1 — Crimping Set

• Crimping pliers
• 160-piece electrical connector assortment
• Wire stripper and crimper

Right Drawer 2 — File Set (5 pieces, 200 mm)

• Flat taper file
• Triangular taper file
• Half-round taper file
• Round taper file
• Square taper file

Right Drawer 3 — Impact Socket Set (28 pieces)

• 14 × short impact sockets — 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 19, 21, 22, 24 mm
• 14 × long impact sockets — 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 19, 21, 22, 24 mm

Right Drawer 4 — T-Handle Socket Wrenches (6 pieces)

• 6 × T-handle socket wrenches — 6, 7, 8, 10, 13, 14 mm

Right Drawer 5 — Oil Service Kit

• 3/8″ sump plug keys — XT45, XT10, XS10, S7, S8, S10, S11, S12, S13, S14, S3/8, S5/16, M16, H8, H9, H10, H12, H13, H14, H17
• 3/8″ sliding T-bar handle
• 3/8″ three-jaw oil filter wrench, 58–110 mm
• 1/2″ three-arm oil filter wrench, 50–95 mm
• Strap-type oil filter wrench, 55–110 mm
• Adaptor 1/2″ > 3/8″
• Adaptor 3/8″ > 1/2″